Loading... Please wait...

Hover over image to zoom

  • Image 1

MegaSquirtPNP G2 MM9697 for the 96-97 Mazda Miata, manual trans

Market Price:
Our Price: $799.00
Part Number: MSPNP2-MM9697
Quantity:


Share:

OFF ROAD USE NOTICE: items sold through Power Adder Solutions including tuning products,supercharger / turbocharger systems maybe designed for off-road/race use only, and are not applicable for vehicles in states that require pollution controlled vehicles. California (CARB) & other states prohibit the sale or use of some aftermarket parts, including those that tamper with, modify or defeat emissions systems in any 1966 and newer vehicles. Power Adder Solutions prohibits the use of these products on emission controlled roads. These parts are sold for OFF ROAD, RACE-ONLY, ground-vehicle use only controlled environment.

Power Adder Solutions does not implicitly or explicitly confirm the legality of using any products it sells on public roads, that is entirely the responsibility of the consumer.

Product Description

1996-1997 USDM Mazda Miata w/ manual tranny

Does not fit the 1996-1997 European / Japanese market 1.6 cars. These need the MM9093.

New second generation MSPNP!

We've totally redesigned the MSPNP! This new second generation unit runs MS2/Extra sequential code, using the MicroSquirt Module and a lot of new MSPNP-specific hardware. We've added several major improvements over the original. Here's the features of the new model.

Easy to Use and Install!    

  • Fully Plug and Play Installation - No wiring required for basic functionality.  Average install time is under 1 hour!
  • Base map is pre-loaded to help your engine start on the first turn of the key
  • Real time tuning and data logging with a laptop connection
  • Supports most aftermarket wideband sensors

Fully Tunable Engine Control!     

  • 16x16 Fuel Tables allow high resolution tuning
  • 12x12 Ignition Tables
  • Multiple Acceleration enrichment strategies
  • Closed Loop Idle Speed Control
  • Air Conditioner Control
  • 4 sequential fuel injector channels with individual trim tables
  • Onboard peak and hold drivers support both high and low impedance injectors - No external ballast resistor is needed!
  • Allows removal of stock airflow meter

Advanced Feature Set (Included!)

  • 12x12 Air Fuel Ratio Target Tables for use with wide band O2 sensor for precise tuning and table trim.
  • Built-in 2-step rev limiter / launch control with flat shift
  • Real time barometric correction
  • Internal 4-bar MAP sensor reads up to 44PSI of boost
  • Overboost protection
  • Closed loop boost control (Requires DIYAutoTune.com EBC solenoid kit)
  • Knock sensor input with adjustable sensitivity
  • Headphone output for knock sensor - listen for knock while you tune!
  • Table switching input. Change fuel and spark maps on the fly for different fuels, nitrous activation, etc.
  • Input for flex fuel sensor - switch between E85 and gasoline on the fly!
  • CANBus connector allows interconnection of other MegaSquirt-compatible devices for additional functions (EGT Input, Automatic Transmission Controller, Additional Sensors.....the possibilities are limitless!

 

What you get in the box:

  • MegaSquirtPNP MM9697 ECU

  • MSPNP RS232 serial tuning cable, 6' (USB adapter sold separately, if needed)

  • Tuning Software and Documentation CD

  • 6' Vacuum Hose for MAP Signal and 'T' fitting

  • Four Screws for ECU mounting

     

    Note that although there is a paid upgrade to TunerStudio, it is not needed to tune this ECU. The free version included on the CD can access all the features and tables of the MegaSquirtPNP. The paid version of TunerStudio simply adds tuning and analysis software, such as VE Analyzer Live to tune the fuel tables based on wideband O2 feedback (requiring a wideband O2 sensor and controller, sold separately).

CUSTOMER REVIEWS

Write review

This product hasn't received any reviews yet. Be the first to review this product!

SIGN-UP FOR OUR NEWSLETTER

100% SATISFACTION GUARANTEE

Connect with Power Adder Solutions

Become our fan, follow us, & subscribe for the latest updates & deals.
FacebookYouTube

Subscribe to our Email list

Sign up and receive exclusive access to promotions, sales events, pre-order sales & more!

Contact Us

Power Adder Solutions Inc.
3717 Junction Boulevard
Raleigh, NC 27603
Phone: 919.779.4153

Phone Hours of Operation

Monday - Friday:
9AM-6PM EST
Saturday - Sunday:
Closed
Powered by